Category Archives: Problems with Relays

Discharge or charge relay turns off too soon

Posted on February 27, 2014 by admin

Possible Causes: The current limits may be hitting 0A. For the Charger Safety relay and the Charge Enable relay this means that the charge current limit (CCL) might be hitting 0A causing the relay to latch OFF. For the Discharge … Continue reading →

Posted in Problems with Charging and State of Charge, Problems with Relays, Troubleshooting | Comments Off on Discharge or charge relay turns off too soon

Relays don’t turn on

Posted on February 27, 2014 by admin

Possible Causes: The relay in question may not be enabled in the profile settings. By default, all of the relay outputs on the BMS are disabled. This is done as a safety measure to prevent unintended charging / discharging in … Continue reading →

Posted in Problems with Relays, Troubleshooting | Comments Off on Relays don’t turn on