This represents the amount of time (in seconds) that an State of Charge drift condition must be met (and remain met) before the drift The amount of time (in seconds) that the BMS will perform an State of Charge correction drift over. The larger the time value the slower the drift process moves.
Example: If this is set to 30 seconds then it will take approximately 30 seconds for the BMS to drift (correct) from any given State of Charge percent to a target State of Charge percent.
NOTE: This value has no affect on whether the BMS will drift or not, only the amount of time it takes for a drift to complete.
| < SOC Drift Rate | SOC for Drift Point > |