This section enables support for the thermistor expansion module which allows for the BMS to monitor additional thermistors over CANBUS.
Multiple thermistor expansion modules can be used together. Please consult the thermistor expansion module manual for additional details on configuring the modules.
The Thermal Broadcast CANBUS Interface allows the user to specify which CAN interface the thermistor expansion modules are connected to (either CAN1 or CAN2).
The Thermal Broadcast CANBUS Identifier should match the CAN ID programmed in to the Thermal Expansion Modules. The default value is 0x80.
Additional details and product manuals (including the installation and wiring manual) for the thermistor expansion module are available at www.orionbms.com under the Downloads / Resources section.
| < Data Logging Display Module Support | Connecting Multiple BMS Units In Series > |